PL5500 Planter
Operation
Great Plains | 411-633M | 2021/10/21
21
transport wheels and two on the wing gauge
wheels.
8. Retract the tractor circuit lift lever to fully raise the
outer wing gauge wheels and the planter frame.
9. Retract the tractor circuit fold lever to retract the
fold cylinders (3) to bring the left and right wings
forward until each wing hook (4) is resting on the
tongue stop (5).
10. Set the tractor fold circuit lever to neutral.
11. Extend tractor circuit lift lever to ensure the lift
cylinders are fully extended.
12. Set the tractor marker circuit lever to neutral to
prepare to set the marker valve.
13. Set the tractor lift circuit lever to neutral to
prepare to set the lift valve.
14. Install cylinder locks on the fully raised lift
cylinder rods on both of the main transport
wheels and secure with pins
.
15. Set the marker valve selector lever to DOWN -
MARKER ON. The fold hydraulics will be inactive.
16. Set the lift valve selector lever REARWARD to
deactivate the lift hydraulics on the two wing
gauge wheels.
Unfolding Wings with IRC
1. Move the planter to level ground with adequate
overhead and side-to-side clearances for
unfolding/folding.
2. Place the tractor in park and/or set the park
brake.
3. Make sure markers, if installed, are fully folded.
While using the console, you may tap the
HOME
icon from almost any screen to
return to the MAIN SCREEN.
TP-75017
A1/A2 ports
Capped B1/B2 ports
FORWARD position
68686
5
4
4
3
3
TP-75019
DOWN - MARKER ON
TP-75018
A1/A2 ports
Capped B1/B2 ports
REARWARD position
i