GREAT PLAINS PL5500, Operator'S Manual, Page: 102 / 109

PL5500 Planter Table of Contents Index Installation
Great Plains | 411-633M | 10/21/2021 95

Marker Installation
1. Install the marker arm (1) to the marker mount
with a hinge pin (2). Secure the pin with a
5/16 x 2-1/4 inch bolt (3) and lock nut.
2. Install the marker chain base (4) to the cylinder
base lug (5) on the planter. Secure with two
3/8 x 2-1/4 inch bolts (6), lock washers, and nuts.
3. Install the marker cylinder (7) to the marker arm
cylinder lugs (8). Secure with a 1 x 4.69 inch
clevis pin (9) and four flat washers (10).Two flat
washers go on the outside of the cylinder lugs
and two on the inside, on each side of the
cylinder rod end.
4. Install the other end of the marker cylinder to the
planter base lug (11) with a 1 x 2.75 clevis pin
(12) and cotter pin.
5. Repeat step 1 through step 4 for the other
marker.
6. Install the valve mounting bracket (1) to the
tongue side plates. Secure with four 5/16 x 1-1/4
inch hex flange bolts (2) and four hex flange nuts
(3).
7. Install the marker valve (4) onto the mounting
bracket and secure with two 3/8 x 2-3/4 inch bolts
(5) and nuts (6).
8. Use the hydraulic diagram on page 67 to connect
the hydraulic hoses to the marker cylinders and
marker valve.
68725
3
2
6
1
4
5
68726
9
8
7
10
11
12
71266
2
1
3
4
6
5
71266A