2018-08-02
155-015M-A
2SF24 and 2SF30
Introduction
12
Owner Assistance
If you need customer service or repair parts, contact a
Great Plains dealer. They have trained personnel, repair
parts and equipment specially designed for Great Plains
products.
Your machine’s parts were specially designed and
should only be replaced with Great Plains parts. Always
use the serial and model number when ordering parts
from your Great Plains dealer. The serial-number plate is
located on the left outside end of the front upper tool bar.
Record your 2SF24 or 2SF30 drill model and serial
number here for quick reference:
Model Number:__________________________
Serial Number: __________________________
Your Great Plains dealer wants you to be satisfied with
your new machine. If you do not understand any part of
this manual or are not satisfied with the service received,
please take the following actions.
1.
Discuss the matter with your dealership service
manager. Make sure they are aware of any problems
so they can assist you.
2.
If you are still unsatisfied, seek out the owner or
general manager of the dealership.
Further Assistance
Great Plains Manufacturing, Inc. wants you to be
satisfied with your new product. If for any reason you do
not understand any part of this manual or are otherwise
dissatisfied, please contact:
Great Plains Service Department
1525 E. North St.
P.O. Box 5060
Salina, KS 67402-5060
Or go to www.greatplainsag.com and follow the contact
information at the bottom of your screen for our service
department.
Figure 2
Serial Number Plate
36129
