NOTICE TECHNIQUE LS100
LS100 TECHNICAL MANUAL
Date : June 2009 From
Aftersales Technical Support
Ref. LS100 GB/FF - Vers. 1.0
Page 74
Reassembling operation
-
Opération de remontage
Put back the 2 “elastomer” parts on new mirror.
Replacer les 2 pièces en « élastomère » sur le nouveau miroir.
Put back the mirror by placing the 2 “elastomer” parts at the top and
bottom position.
Remettre en place le miroir en plaçant les 2 pièces en « élastomère » en
position haute et basse.
Tight the 4 screws up to feel the resistance of the elastomer parts.
Resserrer les 4 vis jusqu’à la résistance des joints élastomère.
This operation is finished, but it is
IMPERATIVE
to make a beam alignment checking.
See chapter LS100-A07
Opération terminée, mais il est
IMPERATIF
de faire un contrôle et l’alignement
faisceau. Voir chapitre LS100-A07