NOTICE TECHNIQUE LS100
LS100 TECHNICAL MANUAL
Date : June 2009 From
Aftersales Technical Support
Ref. LS100 GB/FF - Vers. 1.0
Page 159
Switch On the machine and then push on X key when “GAVOGRAPH
“ message is on display
Mettre la machine sous tension puis appuyer sur la touché X quand
le message “GRAVOGRAPH » apparait à l’écran LCD.
SETUP
FPGA
2.0
<< - GRAVOGRAPH - >>
PROG
2.91
LCD SOFT
1.0a
32 M°
BOOT
1.2
SET LASER TYPE
TICKLE
RE-ALIGN MACHINE
USING TIME
XX
MODELE
DEOS
POWER
30
LENS
DUAL HEAD
OFF
SET LASER TYPE: This menu is only for information , nothing to adjust .
SET LASER TYPE: Ce menu est uniquement pour information, rien à configurer .
SET LASER TYPE
TICKLE
RE-ALIGN MACHINE
USING TIME
XX
TICKLE
6
Tickle Mode:
PARTIAL
TICKLE
6
0 = OFF
TICKLE: You must enter the tickle value here and save it
after the tickle test, see chapter LS100-A06
TICKLE: Vous devez rentrer la valeur du tickle déterminé
dans le test tickle voir chapitre LS100-A06 .
TICKLE
6
Tickle Mode:
PARTIAL
OFF
FULL
PARTIAL
Tickle mode : Only with Coherent laser tube –
FULL = 35W and 40W
PARTIAL = 55W-60W-70W-80W
Tickle mode: Uniquement sources Coherent.
FULL = 35W and 40W
PARTIAL = 55W-60W-70W-80W
…