EN - 14
2. Secure adjustment dial to seat as shown
below. Use socket wrench to hand tighten
bolt until dial is difficult to rotate, then
loosen bolt slightly until dial rotates freely.
IMPORTANT:
DO NOT loosen bolt more than
one full turn.
3. Check Deck Level – Check unit to ensure
deck level set at factory has been
maintained (See
4. Check Function of all Controls – Ensure
unit runs and performs properly.
Figure 4
Reinstall
hairpin and
clevis here.
Shipping
position for
hairpin and
clevis.
Figure 5
1. Recliner Pin
2. Bearing
3. Seat Adjustment Dial
4. Washer
5. Bowed Washer
6. Flat Washer
7. 3/8-16 x 1 1/2" Hex Bolt
WARNING:
FAILURE OF
CONTROLS could result in death
or serious injury.
