EN - 8
SAFETY RULES
This cutting machine is capable of amputating
hands and feet and throwing objects. Failure
to observe the following safety instructions
could result in serious injury or death.
The following safety instructions are based
on the B71.4 specifications of the American
National Standards Institute in effect at the
time of production.
7. WARNING!
SERIOUS INJURY OR
DEATH MAY RESULT
FROM MACHINE
ROLLOVER
•
Failure to follow these instructions
could result in serious injury or
death
•
Do not operate machine on steep
slopes or near drop offs
•
Avoid sharp and/or quick turns
•
Do not exceed the machine weight
rating of the ROPS
•
Always use the seat belt when the
ROPS is locked in the upright
position
•
Do not jump if machine tips
•
If ROPS is foldable
–
Always keep the ROPS fully
extended
–
WHEN ROPS MUST BE
DOWN
•
Do not use seat belt
•
Drive with extra care
•
If equipped with seat platform:
Do not operate machine without seat
platform pins in place or locks engaged.
ROLLOVER PROTECTIVE STRUCTURE
To maintain operator protection and roll
bar certification:
•
Replace a damaged roll bar, do
NOT attempt to repair or modify.
•
Any alteration of the roll bar must
be approved by the manufacturer.
•
DO NOT exceed the machine
weight rating of the roll bar.
8. CAUTION!
No smoking.
Fill fuel tank to bottom of
neck – MAXIMUM.
MAX. FILL
• Never fill fuel tank when engine is
running, hot or unit is indoors. Never
overfill fuel tank.
• Replace fuel cap securely and clean up
spilled fuel.
9. DANGER!
ALWAYS keep hands and
feet away from discharge
chute.
Training
Read, understand, and follow all instructions
on the machine and in the manuals before
starting.
Be sure the area is clear of bystanders and
pets before operating. Stop machine if
anyone enters the area.
Improper use of power equipment can cause
serous permanent injury or death to the
operator or a bystander.
Understand:
•
How to operate all controls
•
The functions of all controls
•
How to STOP in an Emergency
•
Braking and steering characteristics
•
Turning radius and clearances
If the operator or the mechanic cannot read
the manual, it is the owner’s responsibility to
explain it to them.
Always train any inexperienced operators
and require them to read and understand all
manuals and decals.
WARNING:
Over Filling may cause
severe damage to evaporative
system!
