GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved. No liability for printing errors 04/2011
12
The ON / OFF switch is installed in the left-hand fuselage side: cut an opening in the
fuselage side to suit the switch you intend to fit, and install the switch.
Screw the retract system valve in place in the fuselage together with the retract ser-
vo, as shown in the photograph.
It is important to set the servo travel in such a way that the servo is not mechanically
obstructed (stalled) at either end-point.
The individual compressed air lines can now be installed, as shown in the picture.
Einfahren = Retract
Ausfahren = Extend
zum Drucktank = to compressed air tank
Install the compressed air tank as shown in the illustration, and secure it with a
rubber band. The tank can be filled using the coupler, Order No. 6860.18, which
should be fitted to the connecting hose as shown in the photo.
