GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
We reserve the right to introduce modifications. Not liable for printing errors!
01/2012
Made in
Vietnam
6
The servo mounts are again fastened in the wing halves with the screws included.
Using sandpaper or sanding block, sand the control horns on the surfaces to be
glued in order to achieve an adequate connection when gluing.
As seen in the photos, unstick the slots for the GRP control horns, put a dab of glue
into the slot, and push the control horn in until it stops.
Wipe off any excess glue.
