GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
We reserve the right to introduce modifications. Not liable for printing errors!
01/2012
Made in
Vietnam
3
Caution! Never use more heat than is absolutely necessary. If the iron is too
hot, the covering sheet will melt and holes will form.
The extensively pre-fabricated model can be built in a very short time.
However, the remaining steps are important and have to be carried out with
care. Doing this work properly determines whether the model will have the
prescribed rigidity and flight characteristics; so please work slowly and
precisely!
When putting screws into wood, apply a little casein glue to keep them from
loosening: Squirt casein glue into the drill hole and screw in the screw. All
metal bolts and nuts should be secured against loosening with thread lock
fluid, such as "UHU schraubensicher."
Other required accessories
Motor and accessories
Motor
Order No.
Drive battery
Order No.
Spacer
Order No.
Speed
controller
Order No.
Propeller
Order No.
GRAUPENR
COMPACT 640Z 20.6
V
7779
7655.4
(2 required)
-
7228
1326.18x10
OS MAX FS 91
SURPASS II-P
including Silencer
1894
-
-
-
1314.18x10
OS MAX 120AX
including Silencer
2703
-
2703.36A
-
1314.15x10
OS MAX FS 120
SURPASS-E including
Silencer
1848
-
-
-
1314.14x7
OS MAX FS 120
SURPASS III incl.
Silencer
1886
-
-
-
1314.14x7
OS MAX FS 91
SURPASS II including
Silencer
1926
-
-
-
1314.13x10
Radio control system
It must have at least 8 channels and 5 servos. Furthermore, the transmitter
must be capable of servo rotation reversal.
