GRAUPNER POLARON EX-1400, Operating Instructions Manual

Page: 32 / 56

Eng
lish
32 33
PM
09:03:26 CYCLE
CC/CV
CH1 CH2
13 LiPo 03s 2200
0.0 °C
00:02:23
73
mAh
11.681
V
1.80
A
11.97Vin 33.3m Ω
STOP
1.0A 3.0A
Current Set
15.0A
5.0A 10.0A
20.0A
[01]
C-D
Increase or decrease now by using the INC / DEC buttons to select the current
value, such as 1.80 A. If necessary, you can also specify a value that strongly
deviate from the current value by touching one of the six option buttons.
Tapping the
fi eld closes the window and takes the selected value into the
memory.
PM
09:03:38 CYCLE
CC/CV
CH1 CH2
13 LiPo 03s 2200
0.0 °C
00:02:35
75
mAh
11.684
V
1.80
A
11.97Vin 33.3m Ω
STOP
Do you want to stop
the operation?
ESC STOP
[01]
C-D
If it is touched the STOP button at the bottom of the display during the actual
charge or discharge process, it appears the display on the left.
Tapping „Yes“ will cancel the further running in the background.
Tapping „No“, the window hides again, and takes the operation run unaffected-
ly.
PM
10:31:09 CYCLE
END
CH1 CH2
13 LiPo 03s 2200
0.0 °C
01:30:06
2173
mAh
11.678
V
2.20
A
11.97Vi 33.3m Ω
STOP
END : NORMAL
The operation is finished.
Pls touch this window
and then the window will
disappear.
Operation Finished
C-D
After proper completion of the process the charger emits audible signals and
the display shows corresponding informations.
So Tap the window and afterwards, if necessary, the STOP or ESC key to
reverse to basic display.