GRAUPNER Micro Star 400, Manual

Page: 26 / 28

Micro Star 400 v2
2
Replacement parts
Graupner
Order No.
Description Dimensions
[mm]
No. off
Reqd./Pack
4441.01 Main rotor blade, plastic 2
4441.02 Tail rotor blade, plastic 2
4441.303 Cabin and glazing 1
4441.04 Horizontal / vertical stabilizers 1 each
4441.305 Skid bar 2
4441.306 Skid tube, black aluminium 2
4441.307 Tail boom strut, CFRP 2
4441.308 Tail rotor servo mount, plastic 2
4441.310 Tail boom, black aluminium 1
4441.311 Tail boom bracket, plastic, 10 mm 2
4441.312 Tail rotor drive shaft with bevel pinion, CFRP 1
4441.314 Crown pinion C, plastic 2
4441.15 Motor pinion, brass, 10-tooth 1
4441.316 Ballrace set, tail rotor drive shaft (3 bearings) 1
4441.317 Toothed belt for tail rotor drive system 1
4441.320 Mechanics chassis, V2 1
95168 Ballrace for main rotor shaft, 5 x 10 x 4 1
4441.21 Drive motor and pinion 1
4441.22 Main rotor shaft, aluminium 1
4441.23 Main gear 1
4441.24 Hub and freewheel 1
4441.325 Bellcrank set, pitch-axis 1
4441.326 Battery holder, aluminium 1
4441.329 Tail rotor drive bracket (toothed belt), w/ bearings 1
4441.30 Roll-axis / collective pitch bellcrank set 1
4441.31 Swashplate 1
4441.332 Washout unit 1
4441.333 Tail rotor drive system (toothed belt) 1
4441.334 Collective pitch pushrod 2
4441.41 Tail rotor blade holder 2
4441.42 Control bridge, complete 1
4441.343 Bellcrank 1
4441.344 Tail rotor shaft and toothed belt pulley 1
4441.444 Tail rotor shaft and bevel pinion (V2) 1
4441.45 Tail rotor hub 1
4441.46 Ballrace 2
4441.347 Tail rotor housing (10 mm) 1
4441.61 Main rotor blade holder 2
4441.62 Flybar with control levers 1
4441.63 Hiller paddle 2
4441.364 Paddle adaptor 2
4441.65 Rotor head centre piece and rocker 1
4441.66 Feathering spindle 1
4441.67 Ballrace 1
4441.368 Washout unit driver, aluminium 1
4441.90 Screw set 1
4441.391 Pushrod and ball-link set 1