Micro Star 400 v2
17
Assemble the main rotor head and rocker (4441.65), together with the remaining parts such as
the blade holders 4441.61, the feathering spindle 4441.66, the driver 4441.368, the washout
unit 4441.332 and the main rotor shaft 4441.22, as shown in the illustration. Check all levers
and links for freedom of movement. Loosen the screws "N" by half a turn if necessary.
Position the collective pitch control slider "P" with the hole at the bottom, then slide it into the
washout unit and the slot in the main rotor shaft. Slide the collective pitch pushrod 4441.334 into
the main rotor shaft, threaded end first, and screw it into the slider "P" by about seven full turns.
Check for freedom of movement; if necessary, rotate the driver 4441.368 slightly to correct any
stiffness.
Assemble and install the flybar with the control levers 4441.62, the paddle adaptors 4441.364
and the Hiller paddles 4441.63. Set the flybar exactly central in the rotor head.
Fit the swashplate 4441.31 on the main rotor shaft, then set the pushrods 4441.391 to the
lengths stated in the drawing, and connect them as shown.
Summary of Contents for Micro Star 400
Page 28: ...Micro Star 400 v2 4 Notes...
