GRAUPNER Alpha 150Q, Manual

Page: 8 / 48

8 / 48
16571.GPS_Alpha150Q_V2.0sh.en
Symbol description
Always observe the information indicated by these warning signs.
Particularly those which are additionally marked with the words
CAUTION or WARNING .
!
The signal word WARNING indicates the potential for serious injury,
the signal word
CAUTION
indicates possibility of lighter injuries.
The signal word
Note
indicates potential malfunctions.
Attention
indicates potential damages to objects.
Safety notes
!
This safety notes are intended to protect you and other people. They
are also used for safe handling the product. Therefore please read
this section very carefully before using the product!
• Do not leave the packaging material lying around, this could be
a dangerous toy for children.
• Persons, including children, with reduced physical, sensory or
mental capabilities, or lack of experience or knowledge, or not
capable to assemble and use safely this Race copter Alpha
150Q GPS must not use it without supervision or instruction by
a responsible person.
• Operation and use of radio-controlled models needs to be
learnt! If you have never operated a model of this type before,
start carefully and make yourself familiar with the model's
reactions to the remote control commands. Proceed responsi-
bly.
• First, always perform a range and function test on the ground
according to the manual of your transmitter (to do so, hold
your model tight), before you use your model. Repeat the test
with running motor and with short throttle bursts.
• Due to safety and licensing reasons (CE), any unauthorized
reconstruction and/or modification of the product is prohib-
ited.
• Only use the components and spare parts that we recommend.
Always use matching, original Graupner plug-in connections of
the same design and material.
• Make sure that all of the plug-in connections are tight. When
disconnecting the plug-in connections, do not pull the cables.
• Protect your copter from dust, dirty, humidity and other small
parts. Do not expose it to vibrations or to extreme heath or
cold. The models may only be operated remotely in normal
outside temperatures such as from -10°C to +55°C.
• Always use all your Graupner HoTT components only with the
latest firmware version.