GRAUPNER Alpha 150Q, Manual

Page: 44 / 48

44 / 48
16571.GPS_Alpha150Q_V2.0sh.en
Firmware updates
The required programs and files are enclosed in a software pack and
can be found for the corresponding product at
www.graupner.de
.
Download this software package from the Internet, and unpack it on
your Windows PC or laptop.
The procedure is also described in detail in the manual contained in
the data package. You can also singularly download these from the
download page of the product at
www.graupner.de .
Notes
• Please note that compatible firmware is required for reliable
communication between the HoTT components. The programs
and files that are required for updates are therefore combined
into a single pack that is currently named "HoTT_Software_
V4.zip".
• Always use all your RC components only with the latest firm-
ware version. The current firmware version can be found on the
Internet at www.graupner.de .
Firmware updates of a Race Copter Alpha 150Q GPS are performed
via the connector on the left side of the copter using a laptop or PC
running Windows 7 ... 10. You will need the optionally available USB
interface, No. 7168.6, as well as the adapter cables No. 7168.S and
33602.1 or S1038.2.
Connect the adapter lead No. 7168.6 to the USB interface. The polar-
ity of the plug-in system cannot be reversed. Note the small cham-
fers on the sides. Do not use force, the plug should click into place
easily. Finally, connect one of the two adapter cable 336021.1 or
S1038.2 with the correct polarity to the corresponding end of the
adapter cable 7168.S.
Now push the narrow white plug all the way into the side connector.
But do not apply force.
The update takes place via the program part "Slowflyer / Gyro
Receiver Downloader" of the program "Firmware_Upgrade_gr_Stu-
dio" available under "Links". Please follow the notes of the software.
7168.6
7168.S
33602.1
S1038.2
OR
+