background image

5 / 48

16571.GPS_Alpha150Q_V2.0sh.en

Introduction

Thank you very much for purchasing the 

Graupner

 

Race copter 

Alpha 150Q GPS

. This copter is extremely versatile. This manual is 

valid for the copter set listed on the cover sheet. The package con-

tent changes depending on the version.
Read this manual carefully to achieve the best results with your 

Alpha 150Q GPS

 and first of all to safely control your models. If you 

experience any trouble during operation, take the instructions to 

help or ask your dealer or 

Graupner

 Service Centre.

Due to technical changes, the information may be changed in this 

manual without prior notice. Be always updated by checking period-

ically on our website, 

www.graupner.de

 to be always uptodate with 

the products and firmwares.
This product complies with national and European legal require-

ments.
To maintain this condition and to ensure safe operation, you must 

read and follow this user manual and the safety notes before using 

the product!

Note 

This manual is part of that product. It contains important informa-

tion concerning operation and handling. Keep these instructions for 

future reference and give it to third person in case you gave the 

product.

Service centre

Graupner

 Central Service

Graupner/SJ GmbH

Henriettenstraße 96

D-73230 Kirchheim/Teck

   

Servicehotline

   

 (+49) (0)7021/722-130

   Monday - Thursday:

   9:15 am - 4:00 pm

   Friday:

   9:15 am - 1:00 pm

   

 

[email protected]

Graupner

 USA 

3941 Park Dr Suite 20-571
El Dorado Hills, CA 95762

 Website: www.graupnerusa.com
 Phone: +1 855-572-4746
 Email:[email protected]

 

Graupner in Internet

  For the service centres outside Germany please refer to our web site 

www.graupner.de

.

Summary of Contents for Alpha 150Q

















































Reviews: