Page
7/55
transmitter’s integral charge socket. The charge socket is
not
suitable for this purpose.
When you set a particular current for charging, the charger only supplies that current if the value does
not exceed the unit’s technical capacity. If you set a charge current which the
CHARGER cannot
deliver because it falls outside its technical limits, the unit automatically reduces the current to the
maximum possible value.
LIABILITY EXCLUSION
As manufacturers, we at GRAUPNER are not in a position to ensure that you observe the correct
methods of operation when installing, using and maintaining this charger. For this reason we are
obliged to deny all liability for loss, damage or costs which are incurred due to the incompetent or
incorrect use and operation of our products, or which are connected with such operation in any way.
Use only GRAUPNER or GM-Racing charge leads, batteries and accessories.
A-4. RECOMMENDED CHARGE LEADS/POLARITY
The requirements made on rechargeable batteries vary greatly according to their particular application,
and this in turn calls for different types of battery connector. Please note that connectors, connector
names and polarities may vary from one manufacturer to another. For this reason we recommend that
you always use genuine matching connectors of identical construction. The following charge leads are
suitable for battery charging with this unit:
:
JAPAN charging cable
G2 charging cable
BEC charging cable
Order-No.
3371
Order-No.
3011
Order-No.
3037
JR-receiver charging cable GRAUPNER/JR-transmitter charging cable G3,5 charging cable
Order-No.
3021
Order-No.
3022
Order-No.
2970.L
Be sure to use genuine charge leads fitted with cable of adequate conductor cross-section.
Summary of Contents for 6478
Page 13: ...Page 13 55 ...
