Page
22/55
3. DISCHARGE MENU SCREEN
3. DISCHARGE MENU SCREEN
Warning: Deep discharging cells and too high discharge currents can destroy the
battery and can cause explosion and fire!
3-1.
DSCH
CURRENT
- Set wanted discharge currents. Check the battery instruction for the max.
discharge current.
3-2.
DSCH
CUTOFF
- Set discharge cutoff voltage per cell.
If it is set to 1.0V/Cell and its battery cell is 6cells, the discharge is finished
at 6.0V.
For NiCd/NiMH batteries the cells should be never discharged lower as
1.1V/cell.
LiFe cells should be never discharged lower as 2.5V/cell and LiPo/LiIo cells
should be never discharge lower as 3.0V/cell for the highest possible life
time.
Deep Discharge can cause capacity loss and in the worst case it can
destroy the battery and cause explosion and fire.
- Discharge is finished with smallest voltages with connecting the balancer cable the
balancing port of the charger.
Even if the cable is connected during discharging, discharge is not finished
with cell voltage.
3-3.
CUT-TEMP
- Connect the temp sensor to battery, and discharge is finished when it reaches the
selected temp.
- - = - - - - - - -
DISCHARGE
D:00.0A 1.0V/CL 00°C
DISCHARGE SETUP<1/1>
DCHG CURRENT
_0.0A
DCHG CUTOFF _0.0V/C
CUT-TEMP. __0°C
MAX CAPACITY __0%
MATCHED VOLT _0.00V
DISCHARGE SETUP<1/1>
DCHG CURRENT _0.0A
DCHG CUTOFF _0.0V/C
CUT-TEMP. __0°C
MAX CAPACITY __0%
MATCHED VOLT
_0.00V
...
4x
Summary of Contents for 6478
Page 13: ...Page 13 55 ...
