4. DESCRIPTION OF MACHINE COMPONENTS
The star in your cabinet
17
4-003 Description of Operating Elements
Toggle lever, left and right
The toggle lever is used to close and open the Zargen press.
Place all the individual parts in the Zargen press, which is in the open position.
Press all the individual parts, which comprise the complete drawer in the Zargen press, which is in the
closed position.
Take the finished drawer out of the Zargen press, which is in the open position.
Index pin
The index pin positions the machine for preset drawer widths.
Right and left start buttons
Operating both buttons, left and right, at the same time (within 0.5 second) begins the compression
operating process.
4-004 Functions of the ZPM - Producing Drawers with the ZPM
Illustrations 4-004-01, 02, 03, 04, 05, 06
All machines manufactured since 1995 are equipped with a pneumatic 2-handed safety control system. The
compression cycle first begins when both start buttons are operated simultaneously (within 0.5 second). After
one of the start buttons is released, both compression slides return to their starting positions. The start buttons
may only be activated when the toggle lever is completely closed.
Sequence of the operating cycle:
- Pull the index pins. Move the right unit carrier to the drawer width’s corresponding index stop. Release
the index pins. (These must engage in the index stops).
- Open both toggle levers.
- Push the stop pin of the corresponding front height stop „1“ up.
- Push the stop pin of the corresponding back wall height stop „2“ (Illustration 4-004-01) up.
- Load the drawer front with the dowel bore holes up and the front lower edge towards the machine operator.
- Place the drawer bottom with the bottom groove towards the machine operator.
- Place the drawer back wall with the dowel bore holes up and the back wall lower edge
towards the machine operator (Illustration 4-004-02).
- Load both Zargen slides (Illustration 4-004-03).
- Close both toggle levers.
- Press both start buttons on the toggle levers (simultaneously within 0.5 seconds - 2-handed control system).
- Now the compression process begins.
Both compression slides move diagonally towards the bottom and the bottom grip devices are pressed
into the bottom groove.
After the bottom grip devices are pressed in, both compression slides move downward; the back wall
dowel - compression die fence presses on the back wall dowel; the front compression die fence
presses on both front dowels; the Zargen slide is pushed underneath in the bottom groove, until all the
dowels are completely pressed in. (Illustration 4-004-04).
- The compression process has ended. Release both start buttons.
- Wail until both compression slides have reached the highest position (Illustration 4-004-05).
- Open both toggle levers (Illustration 4-004-06).
- Remove the completely assembled drawer.
Note:
If the drawers to be pressed together are using the Grass Railing System 6100, we recommend mounting the
corresponding railing fasteners to the front and back wall before the front and back wall are placed in the
Zargen Press ZPM.
Summary of Contents for ZPM
