56
LDX Series Software Upgradable Camera Platform User’s Guide (v3.1)
Chapter 4 - Operating instructions
4.11.3 Lens files
Lens files contain settings related to the lens configuration (e.g. white shading). Up to four lens
files (LCam1 to LCam4) can be stored in the camera.
4.11.4 Standard files
The green
Std File
button on the left-front side of the camera recalls the standard scene file.
This file contains default parameters for picture performance. A standard operator's file can be
recalled via the
FILES
menu. This file contains parameters for the set-up of the camera.
Customer standard files
You can define a customer standard file for the standard scene file and for the standard
operator's file. The contents of the customer files for both these standard files is stored via the
SECURITY
menu. The selection of a factory defined or a customer defined file for use as a
standard file is also made in this menu. You can only access the functions of the
SECURITY
menu with the PIN code of the camera.
4.12 Access and security
4.12.1 User level
The user level function in the
CONFIGURATION
>
SECURITY
menu restricts access, in varying
degrees, to the operational controls of the camera. You can only access the functions of the
SECURITY
menu by entering the PIN code of the camera.
4.12.2 Selecting the user level
There are four user levels: user 0, user 1, user 2 and user 3. The purpose of the user levels is to
restrict the set of functions which can be changed by whoever is using the camera. In this way
a more centralized and uniform control can be achieved and the danger of the camera operator
accidentally changing critical functions while shooting is reduced.
User level 0 is a special protection level which locks most of the operational controls of the
camera. Use this level to ensure that a camera that has been set-up is not tampered with. User
level 0 is not normally used for operational purposes as it is too restrictive for normal
circumstances. The recommended minimum user level is 1. For full control set the level to 3.
When you switch off the power, the access rights that were obtained by the use of the PIN
code are disabled and the camera starts at the assigned user level when switched on again.
•
User 0: Limited operation, no video control, restricted operational control (for example:
crane or robotic camera operation).
•
User 1: Standard operation, basic video control, full operational control (for example:
studio or event camera operation).
•
User 2: Stand alone operation, full video control (for example: solo operation, motor bike
sports registration).
•
User 3: Installation tasks, full video control, full configuration control (for example: camera
engineers, testing or rigging up operation).
Summary of Contents for LDX Elite
