GRASS VALLEY LDX Elite, User Manual

Page: 33 / 128

LDX Series Software Upgradable Camera Platform User’s Guide (v3.1) 33
Chapter 4 - Operating instructions
Chapter 4
Operating instructions
4.1 Using the camera
Attach a lens, viewfinder, microphone and any other accessories to the camera. Attach the
Fiber or Triax cables and/or supply the adapter with power.
4.1.1 Switching on the power
1. On the XCU set the power switch to the on position ( I ). The green power light lights.
2. Set the camera power switch of the camera to the on position .
3. Allow a few moments for the camera to perform a self-test and for the system to
establish communications. The startup process can be monitored on the indicator panel of
the XCU.
☞
Note
☞
Note
To switch the camera to stand-by, set the power switch of the camera to the position.
4.1.2 Controlling the camera
There are several ways to control the camera:
• Using the operational switches on the camera;
• Using an Operational Control Panel (OCP 400) connected to the C2IP network or XCU;
• Using the camera menu to select functions;
• Using a Master Control Panel (MCP 400) connected to the C2IP network or XCU;
☞
Note
☞
Note
If you cannot access some camera functions or you wish to restrict access, refer to “Access
and security” on page 56 .