GRASS VALLEY LDK 4000 ELITE -, User Manual

Page: 92 / 122

92 LDK 8000 Elite/4000 Elite System camera User’s Guide (v1.01)
Chapter 6 - System menu
Audio 1 Source Line, Mic, Mic48, Front Selects source for audio channel 1 (Only
when a Wireless adaptor is installed) User 1 Oper
Audio 1 Level -22dB, -28dB, -34dB,
-40dB, -46dB, -52dB,
-58dB, -64dB
Sets input gain level for audio channel 1
(when audio gain mode is set to local). User 1 Oper
Audio 1 HPF Off , On Turns high-pass filter for audio channel 1 on
or off. Use to reduce 50 Hz and 60 Hz hum
or low frequency noise. User 1 Oper
Audio 2 Source Line, Mic, Mic48, Front Selects source for audio channel 2 (Only
when a Wireless adaptor is installed) User 1 Oper
Audio 2 Level -22dB, -28dB, -34dB,
-40dB, -46dB, -52dB,
-58dB, -64dB
Sets input gain level for audio channel 2
(when audio gain mode is set to local). User 1 Oper
Audio 2 HPF Off , On Turns high-pass filter for audio channel 2 on
or off. Use to reduce 50 Hz and 60 Hz hum
or low frequency noise. User 1 Oper
Tally
Onair Lamp Enable , Disable Select enable when the tally light at the
front of the 7-inch viewfinder has to follow
the tally signal; select disable if you never
want it to light. User 0 Oper
Tally Lock Off, On Turns tally lock function on or off. When tally
lock is on, some camera controls are locked
when camera is on air. User 3 -
Reverse Scan
Reverse Scan Off , On Turns reverse scan on or off. User 0 Scene
Mode Horiz , Vert, Both Selects reverse scan mode:
Horiz = the image is flipped horizontally;
Vert = the image is flipped vertically;
Both = the image is flipped both horizontally
and vertically. User 0 Scene
Exposure
Lighting -10..+10 (0) Sets the exposure correction to fine-adjust
for ambient lighting frequency when
exposure mode is 50 Hz or 60 Hz. User 1 Scene
Clean Scan
Cl.Scan Mode Extended, Normal Selects clean scan mode:
Normal (VAR2 on OCP/MCP) = shutter is
running (no smear);
Extended (VAR1 on OCP/MCP) = shutter is
not running (more accurate clean scan but
possible vertical smear). User 1 -
Value 50.8.. 125.0 Hz (50 Hz) /
61.0 .. 150.0 Hz (60 Hz)
or
19.6 .. 7.9 ms (50 Hz) /
16.3 .. 6.6 ms (60 Hz) Select clean scan frequency. User 1 -
Units Hz , mSec Selects display units for clean scan. User 1 -
Gain Preset
Gain - (dB) -3dB , -6dB Selects gain value for - preset. User 2 Oper
Install Values Description Level File