manualshive.com logo in svg

GRASS VALLEY LDK 4000 ELITE -, User Manual

Share
Download
GRASS VALLEY LDK 4000 ELITE - User Manual Download Page 37

LDK 8000 Elite/4000 Elite System camera User’s Guide (v1.01)

37

Chapter 4 - Operating instructions

Chapter 4

Operating instructions

4.1  Using the camera

Attach a lens, viewfinder, microphone and any other accessories to the camera. Attach the 
hybrid Fiber, Triax or HD-SDI cable and/or supply the adaptor with power.

4.1.1  Switching on the power

1.

On the Base Station set the master power switch to the on position (

I

). The green power 

light lights. 

2.

Set the camera 

Power 

switch of the camera to the on position 

.

3.

Allow a few moments for the camera to perform a self-test and for the system to 
establish communications. 

☞

Note

 

☞

Note

 

To switch the camera to stand-by, set the 

Power 

switch of the camera to the 

 position.

4.1.2  Controlling the camera

There are several ways of controlling the camera:

•

Using a Master Control Panel MCP 400 connected to the C2IP network or Base Station.

•

Using an Operational Control Panel OCP 400 connected to the C2IP network or Base 
Station.

•

Using the switches on the camera itself.

•

Using the menu system to select functions.

☞

Note

 

☞

Note

 

If you cannot access some camera functions or you wish to restrict access, refer to 

“Access 

and security” on page 53

.

Summary of Contents for LDK 4000 ELITE -



























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands