GRASS VALLEY LDK 4000 ELITE -, User Manual

Page: 57 / 122

LDK 8000 Elite/4000 Elite System camera User’s Guide (v1.01) 57
Chapter 5 - Video setup
Chapter 5
Video setup
5.1 Video settings
5.1.1 Standard settings
To ensure that some of the camera functions are not set to unusual values, a standard file has
been defined that contains the default values for most video functions. The chapter
“Menu
contents” on page 83 lists the values that are set when the standard file is recalled.
To recall the standard values for the various video functions, press the green Standard file
button on the left-front side of the camera and hold it for two seconds. The standard values
only take effect when the camera is not On Air.
The standard file can be selected as either a factory or a customer standard file. Changing the
standard file can only be done in the System security menu if the owner card or the PIN code
is used.
5.1.2 Non-standard indicator
The non-standard indicator in the viewfinder (the lights when one of the following conditions
occur:
– Exposure time is not set to the nominal value;
– Black stretch is on;
– Extended auto iris is on;
– AWC or FL50/FL60 color temperature is on.
5.2 Video modes
Go to the
INSTALL > VIDEO MODE
menu item and choose the video mode you wish to use for
acquisition. The tables in the following sections show the possible output signals available
(both on the Base Station and the camera adaptor) for each camera version and video mode.