manualshive.com logo in svg

GRASS VALLEY LDK 4000 ELITE -, User Manual

Share
Download
GRASS VALLEY LDK 4000 ELITE - User Manual Download Page 15

LDK 8000 Elite/4000 Elite System camera User’s Guide (v1.01)

15

Chapter 1 - Introduction

Chapter 1

Introduction

1.1  Welcome

The LDK 8000 Elite/4000 Elite is a high definition multi-format (LDK 8000 Elite) or single-
format (LDK 4000 Elite) camera head using three 2/3-inch HD-DPM

+

™ imagers. The 

small, lightweight, camera head contains the optical pickup devices and digital image 
processing electronics, while the transmission system (HD Fiber, TriaxHD, HD-SDI or HD 
Wireless) can be selected by using interchangeable dockable adaptors. The dockable 
principle allows a choice of transmission and thus the greatest flexibility and cost-effective 
solutions in multiple applications.

1.1.1  About this manual

The purpose of this manual is to present a detailed description of how to operate the LDK 
8000 Elite/4000 Elite camera equipped with a dockable transmission adaptor. It provides the 
information necessary to use the camera in different configurations and with various 
attachments. This manual describes all operating features of the camera so it can be used to its 
full potential. 

This guide is so designed that it can be used as an introduction to those who are new to the 
camera, as a simple procedural guide to those who wish to set-up and start shooting 
immediately, and as a reference work to be consulted as required during the long life of the 
camera.

1.1.2  Related documents

Before proceeding, check the Grass valley website at www.grassvalley.com for the latest 
version of this user’s guide and additional information:

•

Online versions of documentation; updated versions of user’s guides, data sheets, 
brochures, application notes in pdf-format are available for download.

•

Software downloads; camera software updates, release notes and installation instructions 
are available for download.

Summary of Contents for LDK 4000 ELITE -



























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands