manualshive.com logo in svg

GRASS VALLEY LDK 4000 ELITE -, User Manual

Share
Download
GRASS VALLEY LDK 4000 ELITE - User Manual Download Page 50

50

LDK 8000 Elite/4000 Elite System camera User’s Guide (v1.01)

Chapter 4  - Operating instructions

4.7  Communication

Call button

Press this momentary button to send a signal to the control panels calling for attention. The 
ND/RE indicator in the viewfinder shows when a call signal is sent or received.

The call button can also be used to playback a voice mail message that has been recorded in 
the Base Station. Press once to start playback; press again to stop.

Data channel

The Aux connector on the side of the adaptor provides analog control signals and allows for the 
connection of a two-way private data channel between camera and Base Station. In the 

INSTALL

 menu, the tracker microphone and engineering intercom channels can be selected to 

carry the private data instead of their normal function.

Tracker tally signal

The tracker connector on the side of the adaptor, as well as providing full intercom facilities for 
the dolly or crane driver, also carries a tally signal and a +12 VDC power supply. This allows an 
external On Air lamp to be used.

Summary of Contents for LDK 4000 ELITE -



























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands