5. In the text of the configuration file, identify the RTIO setting and if necessary modify the value
as follows:
•
On a K2 Summit Production Client the required RTIO value is
370
and is configured as
follows:
# *********************************************************
# A stripe section for defining stripe groups.
# *********************************************************
[StripeGroup VStripe]
.
.
.
Rtios 370
.
•
On a K2 Solo Media Server with standard Hard Disk Drives (HDD) the required RTIO value
is
170
and is configured as follows:
# *********************************************************
# A stripe section for defining stripe groups.
# *********************************************************
[StripeGroup VStripe]
.
.
.
Rtios 170
.
•
On a K2 Solo Media Server with optional Solid State Drives (SSD) or on a K2 Summit
Production Client the required RTIO value is
250
and is configured as follows:
# *********************************************************
# A stripe section for defining stripe groups.
# *********************************************************
[StripeGroup VStripe]
.
.
.
Rtios 250
.
6. Do one of the following:
•
If you modified the configuration file, click
Modify
and when prompted "...restarted now"
click
OK
. The K2 system restarts.
•
If you did not modify the configuration file, click
Cancel
and then exit Storage Utility. When
prompted "...back to online mode?" click
Yes
.
Reset Capture Services
Do not do this task if:
•
You do not use any of the K2 Capture Services.
78
K2 Version 7.3.8 Release Notes & Upgrade Instructions
23 November 2010
Upgrading K2 systems
