GRASS VALLEY K2 SOLO - Quick Start Manual Download Page 105

Page: 105 / 108

2. Select the license in the SabreTooth License Manager.

3. Use the Delete key on your keyboard or right click with your mouse and select

Delete

4. On the K2 Summit Production Client, if you have completed your changes, enable the write

filter.

Archiving licenses

You can archive your licenses to a secure external location. This allows you to quickly re-install a
license should it be deleted or should you have to downgrade and then re-license the software. You
can archive multiple licenses at the same time.

NOTE: If you downgrade to an earlier version of the licensed software, make sure to archive
the licenses first.

1. In the SabreTooth License Manager, select the license or licenses.

2. Choose

File | Export License

to open the Save As dialog box.

3. Assign a meaningful name to the file, and save it to the desired location. Grass Valley recommends

saving the license file to a USB drive or other external location.

23 November 2010

K2 Version 7.3.8 Release Notes & Upgrade Instructions

105

Upgrading K2 systems

Summary of Contents for K2 SOLO -













































































































Search results

Summary of Contents for K2 SOLO -

Reviews:

Related manuals for K2 SOLO -

Brands by name

Popular brands

GRASS VALLEY K2 SOLO -, Quick Start Manual

Search results

Summary of Contents for K2 SOLO -

Reviews:

Related manuals for K2 SOLO -

Brands by name

Popular brands