GRASS VALLEY IQMIX25 Series, User Manual

Page: 34 / 98

34
RollCall Control Panel
Information Display
• Receiver TPG (Test Pattern Generator) - see page 44 .
• Counters - see page 45 .
• FEC (MIX25 only) - see page 46 .
• NMOS - see page 48 .
• Ethernet Pages 1 and 2 - see page 53 .
• Ethernet 1 and 2 RTP Sender - see page 54
.
• Ethernet 1 and 2 RTP Receiver - see page 55
.
• Ethernet RTP Receiver Video Stats - see page 56 .
• Ethernet RTP Receiver Audio Stats - see page 57 .
• Ethernet RTP Receiver Meta Stats - see page 58 .
• Link Control - see page 59 .
• HDR Control - see page 60 .
• Destination Timing - see page 62 .
• Audio V Fade - see page 63 .
• Audio Type Control - see page 64 .
• Input Loss Control - see page 65 .
• Spigot 1-x - see page 66 .
• Logging - SDI Info - see page 72 .
• Logging - System - see page 73 .
• Logging - Network - see page 77 .
• Logging SFP - see page 79 .
• Logging FPGA - see page 82 .
• Logging Spigot 1-x - see page 83 .
• Logging - NMOS - see page 86 .
• Logging - Card Diagnostics - see page 87 .
• Rolltrack - see page 88 .
• Loopback Router - see page 90 .
• Setup - see page 91 .
• Ethernet Gb - see page 93 .
• Ethernet Arcnet - see page 93 .
• Interop - see page 94 .
• SFP Configuration - see page 96 .
Setting Values
Many of the settings within the templates have values, either alpha or numeric.
When setting a value in a field, the value, whether text or a number, must be set by pressing the
E
NTER
key, or clicking the Save Value button.
Clicking an associated Preset Value button returns the value to the factory default setting.
Information Display
The Information display pane appears at the top of each page, and shows basic information
on the input, standard and status of the module. The information to be displayed is defined on
the
SDI Selection and Information Select panes to the right of the Information display.