87
IQMIX25/40
User Manual
Logging - Card Diagnostics
Information on several parameters can be made available to a logging device connected to the
RollCall network. Each logging page comprises three columns:
•
Log Enable
- Select the check boxes that correspond to the parameters for which log
information should be collected.
•
Log Field
- Displays the name of the logging field.
•
Log Value
- Displays the current log value.
Where N is the input number
Logging - Card Diagnostics Page
RollTrack Source
Description
NVRAM_FS=
Reports NVRAM file system.
TOTAL_AVAILABLE_
MEMORY=
Reports total amount of CPU memory available.
TOTAL_USED_MEMORY=
Reports total amount of CPU memory used.
NUM_CORE_DUMPS=
Reports number of core dumps performed by the module.
LAST_CORE_DUMP_NAME=
Reports name of last core dump performed by the module.
LAST_CORE_DUMP_TIME=
Reports time of last core dump performed by the module.
PWRSAVE_MEMORY_
RESTORE=
Reports whether the power-safe memory facility is working
correctly. Possible values are:
• OK
• FAIL
PMIC_VERSION=
Reports version of the PMIC chip fitted to the module.
Summary of Contents for IQMIX25 Series
