GRASS VALLEY IQMIX25 Series, User Manual

Page: 89 / 98

89
IQMIX25/40
User Manual
RollTrack Command
This item enables a command to be sent to the selected destination unit.
The command may be changed by typing a code in to the text field, and then selecting S to
save the selection. Clicking P returns to the default preset command.
A RollTrack command consists of two sets of numbers, for example: 84:156 :
• The first number, 84 , is the actual RollTrack command.
• The second number, 156 , is the value sent with the RollTrack command.
RollTrack Sending
A message is displayed here when the unit is actively sending a RollTrack command. Possible
messages are:
RollTrack Status
A message is displayed here to indicate the status of the currently selected RollTrack index.
Possible RollTrack Status messages are:
Message Description
No The message is not being sent.
Yes The message is being sent.
RollTrack Source Description
OK RollTrack message was sent and received successfully.
Unknown RollTrack message has been sent but transmission has not
yet completed.
Timeout RollTrack message has been sent but acknowledgment not
received. This could be because the destination unit is not at
the location specified.
Bad RollTrack message has not been correctly acknowledged at
the destination unit. This could be because the destination
unit is not of the type specified.
Disabled RollTrack sending is disabled.