GRASS VALLEY IQMIX25 Series, User Manual

Page: 31 / 98

31
Card Edge LEDs
The LEDs on the edge of the module indicate its operating status.
Front Panel Description

STATUS PB=IDENT STATUS

Green = PTP-LOCK OK

Off = PTP-LOCK Fail

BOARD

CPU BOARD

Green = CPU clock running.

Off = CPU stopped.

PTP

REF REF

Green flashing = Watchdog timer OK

8

16 1 - 16 - Spigot status.

Off = Input/Spigot not in use.

Red = No input.

Yellow = TPG.

Green = Video flow detected (SDI
input for Sender spigot, output IP
flow for Receiver spigot).

For UHD Quad-Link Modes :

Banks of four adjacent LEDs (e.g. 1 -
4, 5 - 8, etc) will light simultaneously
to denote the 4 x 3G streams being
received on a UHD input. If a TPG is
enabled, either sender or receiver,
four adjacent LEDs will light yellow
to denote the 4 x 3G linked internal
flows.

7

15

6

14

5

13

4

12

3

11

2

10

1

9

SFP 2

QSFP 2 SFP 1 - 2 = Status/lane.

Red = Fault (3V3 regulator failure),
Green = OK (10G SFP), Blue = OK
(25G SFP). If flashing, link is down.
QSFP 1 - 2 = Status/lane.

Red = Fault (3V3 regulator failure),
Cyan = OK (40G QSFP). If flashing,
link is down.

SFP 1

QSFP 1
PB=RESET