GRASS VALLEY Ignite HDC Series, Instruction Manual

Page: 52 / 122

52 Ignite SDC/HDC Robotic Camera Instruction Manual
Appendix A — SD (NTSC) Camera Block
Color Settings
Figure 25. Color Settings Submenu
Table 10. Color Settings
Selection Description
Chroma Level (-3 to +3) Chroma Level can be decreased or increased to three levels.
White Bal
ATW: The white balance is automatically adjusted to the optimum position.
AWC A, AWC B: Once the white balance is adjusted with the ITEM/AWC
switch on the back of the camera, it is no longer necessary to set the white
balance again if you simply select AWC A or AWC B, provided that the
camera is used under the same conditions. Fine color adjustment can be
made after setting AWC by red/blue gain adjustment in User Mode.
3200K: The white balance is adjusted to 3200K illumination.
5600K: The white balance is adjusted to 5600K illumination.
ATW Speed (Slow 2, Slow 1, Mid, Fast 1, Fast 2) ATW Speed can be set.
Pedestal
(-150 to +150) The black level (pedestal) of the luminance (Y) signal can
be set. Used in adjusting the black levels of two or more cameras.
Painting
(-150 to +150)
R Gain, B Gain: Fine adjustment of the white balance can be made after
AWC setting when AWC A or AWC B is selected in White Balance Setting.
The set value returns to ±0 after AWC setting in using the camera alone.
R Pedestal, B Pedestal: Fine adjustment of the black balance can be made
after ABC setting. The set value returns to ±0 after ABC setting in using the
camera alone.
8492_16_r0