2-32
16
Remove the roll holder to be used.
When the slitter is not used, or when winding the media which the edges are cut by the slitter, is one set,
set the roll holder corresponding to one set.
When the media to be wound with the slitter is two sets, set the roll holder corresponding to two sets.
Open the winding stocker cover.
Remove the roll holder to be used.
After setting the winding roll holder, go to Step 17.
<When the winding roll holder is used>
1
/RRVHQWKHÁDQJHÀ[LQJVFUHZRIUROOKROGHUE\WXUQLQJLWFRXQWHUFORFNZLVH
Remove the
ÁDQ
ge.
,IWKHÁDQJHÀ[LQJVFUHZVWRXFKHVWKHSLQRIVKDIWSOHDVHORRVHQWKHÁDQJHÀ[LQJVFUHZVXQWLOLW
cannot be touched.
)ODQJHÀ[LQJVFUHZ
)ODQJHÀ[LQJVFUHZ
Roll holder shaft
Flange B
Flange A
Pin