4-25
4.15
DISTANCE ADJ.
Adjust the distance from the “DISTANCE ADJ”.
The DISTANCE ADJ. is used to correct any discrepancies in the line lengths of the cutting area, which the
discrepancies is generated due to the media type and thickness to be used. The DISTANCE ADJ. is used to
correct the media feeding direction only.
DISTANCE ADJ. is disabled when the “NUMBER OF POINT” is set to “3POINT”.
DISTANCE ADJ. value is -2.00% to +2.00%. Set the value in 0.05 increments.
(Reference example)
[When the “NUMBER OF POINT” is set to “1POINT” or “OFF” and the cutting results of the media feeding
direction is shorter.]
For example, the cutting operation is performed in 99 mm rather than 100 mm, The setting value should be set to +1.00%.
Operation
1
3UHVVWKH>0(18@NH\LQ5($'<VWDWXV
MENU screen is displayed.
2
Press the POSITION (
) keys to select “CHANGE SETTINGS”
7KHLWHPLVKLJKOLJKWHG7KHQSUHVV>(17(5@NH\
CHANGE SETTINGS screen is displayed.
3
Press the POSITION (
) keys to select “DISTANCE ADJ.”.
7KHQSUHVV>(17(5@NH\
DISTANCE ADJ. screen is displayed.
Supplement
Settable range is -200% to +200%.
4
Press the POSITION (
) keys to increase or decrease the
setting value.
