![GRAPHTEC GLT400 User Manual Download Page 98](http://html1.mh-extra.com/html/graphtec/glt400/glt400_user-manual_2257306098.webp)
4-8
CHAPTER 4 Settings and Measurement
(5) Saving and loading settings
The operation settings and the network settings can be saved and loaded.
The save destination is the internal memory of the GLT400 or the SD CARD.
When saving the operation settings or the communication settings, a file that automatically loads the
settings when the GLT400 starts up can be generated by checking the "Automatically load file name". This
file can only be saved in the SD CARD.
For automatic reading, refer to “3.5 Description of Operation Mode (1) Operation at startup <Automatic
reading of operation setting file and network setting file>”.
(6) Option settings
Set optional settings. You can change the language and update the firmware of the GLT400.
(7) Error log
When errors or warnings occur in the GLT400, you can check them on this screen. Items that you can check
in the Error log screen are the occurrence time, error code, and error message. Pressing the Clear log
button will clear the error log.
The error log is also cleared in the following cases:
● When the GLT400 is restarted.
● When this software is exited.
● When this software and the GLT400 are disconnected.