4-16
CHAPTER 4 Settings and Measurement
(2)-6 Misc. Settings
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
Setting object
Setting
Description
Misc. Settings
(1) Perform auto zero ADJ.
The current input voltage is calculated as a zero point voltage value.
(2) Reset auto zero ADJ.
Reset the zero point voltage value.
* When the temperature is set, this function is not available.
(3) Set Zero Point as
The zero point voltage value is displayed.
* When the temperature is set, this function is not available.
Setting
Description
(4) Inter-CH Op
Off, On
(5) Operation
CH-X (Function) CH-Y
CH-X
CH1 to CH200
Function
Four arithmetic operation functions (+, –, x, /)
CH-Y
CH1 to CH200
(6) Scaling
/1000000, /1000, ×1, ×1000, ×1000000
Sets the scaling factor for a calculation result.
<Example>
In the case of calculation result = 0.001
In the case of calculation result = 1000
Calculation result ×1 = 0.001
Calculation result ×1 = 1000
Calculation result ×1000 = 1
Calculation result / 1000 = 1
Calculation result ×1000000 = 1000
Calculation result / 1000000 = 0.001
(7) Span
(8) Upper/Lower
Sets the upper and lower limits of values of a span in which a waveform should be displayed.
The setting value is in reference to a calculation result.
(9) Select
Selects the unit which indicates the calculation results.
Cur, Length, Area, Volume, Velocity, Accel, Freq, Mass, Energy, Pressure, Flow , Temp,
Strain, Brightness, Concentration. arbitrary
(10) Unit
Sets a unit to be used after conversion.
Arbitrary text consisting of alphabetical characters and numerical values can be set as a unit.
When “Select” or “Unit” is specified, it is reflected in here.
● Calculation results are displayed in volts.
The calculation result for 100 mV + 100 mV is 0.2 V.
Use Scaling to display this result as 200 mV.
