4-36
CHAPTER 4 Settings and Measurement
Detailed wireless LAN settings
Selection Item
Description
(3) SSID input
Station:
Set the SSID (access point identification name) of the access point (base unit) to be connected.
Access point:
Set the SSID (access point identification name) of the GLT400.
Up to 32 characters can be set with alphanumeric characters and symbols.
(4) SSID search
The list of wireless access points (base units) is displayed when the SSID is searched. When
you select the access point (base unit) to connect from the list, it is displayed in the SSID input. (for
Station only)
(5) Encryption method
Set the encryption.
WEP:
Set the WEP key with 10-digit alphanumeric symbols for WEP64 and 26-digit alphanumeric
symbols for WEP128.
WPA-PSK/WPA2-PSK:
Set the password using 8 to 63 alphanumeric characters and symbols.
(6) WEP key password
It is displayed when the encryption is set. Set the key.
(7) Apply settings
Apply the encryption method, WEP key, and password settings.
(8) Connection
Connects or disconnects to/from the base unit. (for Station only)
(9) Channel
1ch to 13ch can be set. (for Access point only)
(10) Stealth
SSID concealment mode can be set. (for Access point only)
<Operation procedure> (when setting the Station)
(1) Set the wireless LAN to "Station" and then restart the wireless LAN.
(2) Set the SSID.
If you know the SSID of the wireless LAN base unit, enter the SSID.
You can also select from the list displayed when you search for the SSID.
(3) Search for the SSID.
When the SSID is selected from the list, it is applied automatically.
(4) Set the encryption method.
WEP or WPA-PSK/WPA2-PSK can be set. If this setting is selected, the "WEP key" or "password" is
displayed. Enter the one for the corresponding wireless LAN base unit.
(5) After completing the above settings, press the "Execute" button to execute "Apply settings".
The settings are saved.
(6) Execute "Connection" to enable the wireless.
<Operation procedure> (when setting the Access point)
(1) Set the wireless LAN to "Access point" and then execute "Restart wireless LAN".
(2) Set the SSID.
By default, the identification name generated by the GLT400 name and serial number is displayed.
(3) Set the encryption method.
WEP or WPA-PSK/WPA2-PSK can be set. If this setting is selected, enter the “WEP key” or “password”.
(4) Set the channel.
Set the wireless LAN channel to be used from 1ch to 13ch. Generally, 1ch, 6ch, or 11ch is set.
