2-8
(12) The screen shown below is displayed when the wizard has finished installing the driver.
Click the [Close] button to close the "Found New Hardware" wizard.
(13) The Windows Vista desktop appears, and the scanner is recognized by the computer.
For Windows XP
(1) Use the USB cable to connect the scanner to the computer, and then turn on the
computer.
(2) When Windows starts up, insert the CD-ROM supplied with the scanner into the CD-
ROM drive. The “Start” screen opens automatically. Click the [Quit] button to close the
“Start” screen.
(3) Turn on the power to the scanner.
(4) When Windows XP starts up, the following screen appears (if Service Pack 2 has not
been installed, the screen shown in (5) below appears). Select the option “No, not this
time” and then click [Next].
(5) If Service Pack 2 has not been installed, the following screen appears. Select the option
“Install from a list or a specific location (Advanced).” and then click [Next].
