CE5000-UM-251-9370 6-37
6 DISASSEMBLY AND REASSEMBLY
How to reinstall the drive roller
(1) Reattach in the reverse order in which it was detached.
(2) Spread a suitable quantity of Loctite 222 on the M3L4WP set screw holding the X-drive pulley.
(3) Use the force gauge to pull the X-drive motor pulley flange with a 1.2 kg to 1.3 kg force.
(4) Tighten the mounting screws that hold the X-motor.
(5) Spread a suitable quantity of the Shinetu silicon grease G501 on the X-motor pulley.
(6) Move the X-drive pulley and check the tension of the X-drive belt.
(7) Confirm the Y rail mounting position (see the subsection 6.2.19).
(8) Adjust the drive roller height (see the subsection 6.2.20).
(9) Reattach the other parts in the reverse order in which they were detached.
