CE5000-UM-251-9370 6-42
6 DISASSEMBLY AND REASSEMBLY
Adjusting the height of the grid roller
(1) Position the pinch rollers to the specified location. (For the CE5000-40/60 position the center only.)
(2) Lower the pinch rollers.
Grid roller support bracket
Adjusting position 1
Y-rail
Position the center pinch roller here.
Position the right pinch roller here.
Position the left pinch roller here
when adjusting at the adjusting
position 1.
Adjusting position 2
Adjusting position 3
Adjusting position 4
Position the left pinch roller here
when adjusting at the adjusting
position 2.
(3) Adjust the grid roller shaft height from the adjusting position 1 by the two screws holding the grid roller
support bracket. Don't tighten the those screws too tight because thread of screws brakes.
(4) Adjust the grid roller shaft height to be 74 mm between the grid roller shaft to top of the Y rail as shown
in the picture below.
74 mm
Y-rail
Grid roller
Adjust these screws to
adjust the hight
Y-rail
Height adjustment jig
