6 – 5
6.3 Enabling the AUTO PRE FEED Mode
When the CE2000 first receives data while the AUTO PRE FEED setting is ON, it automatically feeds
the medium forward and backward by the specified distance. This operation marks the cutting film
with the tracks of the grit rollers and thus prevents the film from slipping out of place. When using
roll film, moreover, the CE2000 automatically advances the leading edge of the medium.
Step
1
Press the
PAUSE
key to enter the PAUSE mode.
Step
2
Press the
NEXT PAGE
key until the menu below ap-
pears.
FILM
FUNCTIONS
Step
3
After pressing the
F2/TEST
key (FUNCTIONS),
press the
NEXT PAGE
key once to display the menu
below.
AUTO PRE FEED
Step
4
Press the
F1/ORIGIN
key (AUTO PRE FEED) to display the menu below.
ON PRE FEED
OFF
Step
5
To enable the AUTO PRE FEED mode, press the
F1/ORIGIN
key to move the blinking cursor to the
ON position.
To disable the AUTO PRE FEED mode, press the
F2/TEST
key to move the blinking cursor to the
OFF position.
When the cursor appears in front of the desired setting, press the
ENTER
key to register your AUTO
PRE FEED setting.
Step
6
If you selected the ON setting in Step 5, the message below appears.
AUTO PRE FEED
FEED LENGTH 1m
Use the
and
keys to specify the FEED LENGTH setting. When the displayed value is satisfactory,
press the
ENTER
key to register your FEED LENGTH setting.
Step
7
Press the
PAUSE
key again to cancel the PAUSE mode.
