Page 12
Wiring Diagram for with both Automatic Gate Operator and
Pedestrian Gate Electric Lock Control
IPI-101
RJ45 Network Socket
Ethernet
Option of connecting to Home or Office Net
-
work with Cat 5 Cable or WiFi
not used
not used
GND
GND
12VDC Input
485_B
485_A
GND
Unlock Input
Monitor Input
NC
NO
COM
Expansion
Module
Press to Exit Button
to open driveway gate
connected to Intercom
Electric Strike Lock
on Pedestrian Gate.
If Lock is monitored
this can be connected
to the Intercom so the
open or close state of
the gate can be seen
in the monitor
Magnetic Lock on
Pedestrian Gate.
If Lock is monitored
this can be connected
to the Intercom so the
open or close state of
the gate can be seen
in the monitor
Automatic gate
Motor Control
Board
+
-
-
-
Coil
Note: There can only be one of either an automatic gate operator, Magnetic Lock OR Electric Strike lock per Gate/Door
Output. Monitor connection output may need to have NO and NC terminals swaped around depending on open/close
status of the gate/door.
Gate
or Door
Output
Monitor
Output
Monitor
Output
NO
NC
NO
NC
NO
NC
NO
NC
NO
OR
Monitor Input
NC
NO
COM
2nd Gate
or Door
Output
12VDC Output
GND
Open Light
+
+
-
COM
Open/Close Input
Magnetic Position
Sensor for Pedestri-
an Gate in case there
is no other monitoring
device
NO
NC
5 to 28VDC IN
Unlock Input
Press to Exit Button to
open pedestrian gate
connected to Intercom
NO
Router
GND
+
+
+
+
-
Option 1 to monitor if gate
is open, Relay with coil
voltage to match Open
Light Output
Option 2 to monitor if
gate is open, Magnet-
ic Position Sensor for
Driveway Gate if pre-
ferred
