Page 15
To change the “wired” IP Address change the first three numbers of the IP Address, default gateway and DNS address
so they are the same as the network you want the IPI-101 to work on, then click OK. The menu will disappear but that
doesn’t matter as you now unplug the IPI-101 from the PC and plug it into the router so it will now work from the there. If
the IPI-101 deosn’t work there is a small chance that the IP Address you changed it to is being used by another device
on the network so you’ll need to power down the router, wait 30 seconds and power it back up again to resign other de-
vices IP Adresses automatically. If this doesn’t work there may be a device with a fixed IP Address set the same so you
will need to unplug devices to find the conflicting one that is the IPI-101 menu appears and then change the IPI-101’s IP
Address so it has a different last number, which means plugging it back into the router.
Setup the IPI-101 to work with WiFi
The IPI-101 must be connected to a computer using an ethernet cable, be powered up, be within a few meters from the
router and logged in as above and in the “Network Config” menu option. Here set the “DHCP” so it is set to “Off” and
default Intefance to “wireless”, then set the “wireless” IP Address so it has the same first three numbers as the router it
is to work on. Then go to the “WIFI Info” menu option and wait for any WiFi router hot spots to appear.
Click of the “+” for your router, enter the password for your router and click “OK”. The IPI-101 should then be connected
to the router with WiFi. If it just hangs reading “connecting...” wait a little while because some times it can be a little slow
connecting. Once connected you can unplug the Ethernet cable and install the intercom physically. If you wish to login
to the IPI-101’s menu for any reason with WiFi you will need to use the WiFi IP address set earlier as this is different to
the wired one.
Setup the IPI-101 to work with a Wired Connection
Once you get the login to appear for the IPI-101 the default user name and password is “admin”. Once logged in the
IPI-101’s setup menu appears. Go to the “Network Config” menu to change the IP Address for this device.
