GRANT ENGINEERING (UK) LIMITED
Hopton House, Hopton Industrial Estate, Devizes, Wiltshire, SN10 2EU
Tel: +44 (0)1380 736920 Fax: +44 (0)1380 736991
Email: [email protected] www.grantuk.com
This manual is accurate at the date of printing but will be superseded and should be disregarded if specifications and/or appearances are changed in the interests of continued product improve
-
ment. However, no responsibility of any kind for any injury, death, loss, damage or delay however caused resulting from the use of this manual can be accepted by Grant Engineering (UK)
Limited, the author or others involved in its publication.
All good sold are subject to our official Conditions of Sale, a copy of which may be obtained on application.
© Grant Engineering (UK) Limited. No part of this manual may be reproduced by any means without prior written consent.
IMPORTANT NOTE FOR INSTALLERS
These instructions are intended to guide Installers on the
installation, commissioning and servicing of the Grant MonoWave
indirect HP (heat pump) cylinder. After installing the cylinder, leave
these instructions with the user.
User instructions to guide users in the operation of the cylinder
are in Section 12 of these instructions.
SPECIAL TEXT FORMATS
The following special text formats are used in these instructions
for the purposes listed below:
! WARNING !
Warning of possible human injury as a consequence of not
following the instructions in the warning.
! CAUTION !
Caution concerning likely damage to equipment or tools
as a consequence of not following the instructions in the
caution.
! NOTE !
Used for emphasis or information not directly concerned
with the surrounding text but of importance to the reader.
PRODUCT CODES COVERED
Grant MonoWave indirect HP
Cylinder Model
Product Code
'A rated' 200 litre
HPMONOA/IND200
125 litre
HPMONO/IND125
150 litre
HPMONO/IND150
170 litre
HPMONO/IND170
200 litre
HPMONO/IND200
250 litre
HPMONO/IND250
300 litre
HPMONO/IND300
400 litre
HPMONO/IND400
Slimline 200 litre
HPMONO/IND200/SL
Slimline 250 litre
HPMONO/IND250/SL
Slimline 300 litre
HPMONO/IND300/SL
SERVICING
The cylinder should be serviced at least every twelve months and
the details entered in the Benchmark Book.
Summary of Contents for HPMONO/IND125
Page 38: ...Notes Page 38 NOTES ...
Page 39: ...Notes Page 39 NOTES ...