P a g e
|
45
HT813 Administration Guide
Version 1.0.1.2
Disable Call
Waiting Caller ID
Disables displaying caller ID when receiving a second incoming call. Default is
No
.
Disable Call
Waiting Tone
Disables playing call waiting tone during active call when receiving a second incoming
call. The CWCID will still be displayed. Default is
No
.
Disable Connected
Line ID
Disables displaying the number of the person answering the phone. Default is
No
.
Disable Receiver
Off Hook Tone
Enables / disables the warning to alert that the phone has been left off-hook for an
extended period of time. Default is
No
.
Disable Reminder
Ring for On-Hold
Call
Enables playing the reminder ring. Default is
No
Disable Visual MWI
Disables use of visual message waiting indicator when there is an unread voicemail
message. Default is
No
.
Do Not Escape '#'
as %23 in SIP URI
Replaces # by %23 in some special situations. Default is
No
.
Disable Multiple m
Line in SDP
Sends only one m line in SDP, regardless of how many m fields are in the incoming
SDP. Default is
No
.
Ring Timeout
Stops ringing when incoming call if not answered within a specific period of time. Default
is
60
seconds.
Delayed Call
Forward Wait
Timeout
Forwards incoming call if not answered within a specific period of time when delayed
call forward is activated locally (using *92 code). Default value is
20
seconds.
No Key Entry
Timeout
Initiates the call within this time interval if no additional key entry during dialing stage.
Default is
4
seconds.
Early Dial
Sends an early INVITE each time a key is pressed when a user dials a number.
Otherwise, only one INVITE is sent after full number is dialed (user presses
Dial Key
or after “no key entry timeout” expires).
This option should be used only if there is a SIP proxy is configured and supporting 484
responses (Incomplete Address). Otherwise, the call will likely be rejected by the proxy
(with a 404 Not Found error). Default is
No
.
This feature is NOT designed to work with and should NOT be enabled for direct IP-to-
IP calling
.