P a g e
|
71
HT813 Administration Guide
Version 1.0.1.2
Call Features
The HT813 supports all the traditional and advanced telephony features.
Table 11: HT813 Call Features
Key
Call features
*02
Forcing a Codec
(per call) *027110 (PCMU), *027111 (PCMA), *02723 (G723), *02729
(G729), *027201 (iLBC).
*03
Disable LEC
(per call) Dial “*03” +” number”.
No
dial tone is played in the middle.
*16
Enable SRTP
*17
Disable SRTP
*30
Block Caller ID
(for all subsequent calls)
*31
Send Caller ID
(for all subsequent calls)
*47
Direct IP Calling
. Dial “*47” + “IP address”.
No
dial tone is played in the middle.
*50
Disable Call Waiting
(for all subsequent calls)
*51
Enable Call Waiting
(for all subsequent calls)
*67
Block Caller ID (per call)
. Dial “*67” +” number”.
No
dial tone is played in the middle.
*82
Send Caller ID (per call)
. Dial “*82” +” number”.
No
dial tone is played in the middle.
*69
Call Return Service:
Dial *69 and the phone will dial the last incoming phone number
received.
*70
Disable Call Waiting (per call).
Dial “*70” +” number”.
No
dial tone is played in the middle.
*71
Enable Call Waiting (per call).
Dial “*71” +” number”.
No
dial tone is played in the middle
*72
Unconditional Call Forward:
Dial “*72” and then the forwarding number followed by “#”. Wait
for dial tone and hang up. (dial tone indicates successful forward)
*73
Cancel Unconditional Call Forward
. To cancel “Unconditional Call Forward”, dial “*73”, wait
for dial tone, then hang up.
*74
Enable Paging Call
: Dial “*74” and then the destination phone number you want to page.
*78
Enable Do Not Disturb (DND):
When enabled all incoming calls are rejected.
*79
Disable Do Not Disturb (DND):
When disabled, incoming calls are accepted.
*87
Blind Transfer
