P a g e
|
32
HT813 Administration Guide
Version 1.0.1.2
Config File Postfix
Checks if configuration files are with matching postfix before downloading
them. It allows user to store different configuration files in one directory on the
provisioning server.
Allow DHCP Option 66 to
Override Server
Obtains configuration and upgrade server’s information using options 66
from DHCP server.
Note:
If DHCP Option 66 is enabled, the HT813 will attempt downloading the
firmware file from the server URL provided by DHCP, even though
Config
Server Path
is left blank
3CX Auto Provision
Sends multicast “SUBSCRIBE” message for provisioning at booting stage,
used for PnP (Plug-and-Play) configuration. Default is
Yes
.
Automatic Upgrade
Specifies when the firmware upgrade process will be initiated; there are 4
options:
No
: The HT813 will only do upgrade once at boot up.
Check every X minutes
: User needs to specify a period in minutes.
Check every day
: User needs to specify “Hour of the day (0-23)”.
Check every week
: User needs to specify “Hour of the day (0-23)”
and “Day of the week (0-6)”. (Day of week is starting from Sunday).
Default is
No
.
Randomized Automatic
Upgrade
Randomized Automatic Upgrade within the range of hours of the day or
postpone the upgrade every X minute(s) by random 1 to X minute(s).
Always Check for New
Firmware at Boot up
Configures the HT813 to always search for the new firmware at boot up.
During the boot stage, the HT813 will contact the firmware upgrade server to
search for a new firmware, when available it will start the upgrade process,
otherwise it will boot normally.
Check New Firmware only
when F/W pre/suffix changes
Configure the HT813 to search for the new firmware when the firmware prefix
/ suffix changes. When this option is selected, the HT813 will check for updates
only when the pre/suffix has been changed.
Always Skip the Firmware
Check
Configures the HT813 to skip the firmware check, when this option is selected
the HT813 will always skip searching for a new firmware.
Disable SIP NOTIFY
Authentication
Disables the SIP NOTIFY Authentication on the ATA adapter
. If set to “Yes”,
the ATA adapter will not challenge NOTIFY with 401. Default is
No
Authenticate Conf File
Authenticates configuration before being accepted. This protects the
configuration from unauthorized modifications. Default is
No
.
