manualshive.com logo in svg

Grandstream Networks GDS371 Series, User Manual, Page: 87 / 90

Share
Download
Grandstream Networks GDS371 Series User Manual Download Page 87

Firmware Version 1.0.7.10

Increased maximum unlock holding time to 1800 seconds (30 minutes). [Basic Settings]

Added support for anonymous MJPEG stream viewing for each of the three streams. [Enable Anonymous LiveView]

Firmware Version 1.0.7.8

Enhanced the failover mechanism based on DNS SRV. [DNS Mode]

Include Holidays on Keep Door Open Schedule for Door 2. [

Holiday Mode

]

Firmware Version 1.0.7.7

Added siren alarming function when door opened abnormally. [Connection Examples]

Added option to only accept incoming SIP call from Proxy/Server. [Accept Incoming SIP from Proxy Only]

Added support for including Holidays at Keep Door Open schedule. [Keep Door Open]

Added reset/restore factory default password via special keypad combination operations. [FACTORY RESET]

Firmware Version 1.0.7.4

Added ability to separate webUI credentials from the GDSManager credentials. [GDSManager Configuration Password]

Added G.729 audio codec support. [Technical Specifications] [Preferred Vocoder]

Added ability to enable multiple audio codecs simultaneously and specify priority of codecs. [Preferred Vocoder]

Added “Schedule” for firmware upgrade and provisioning. [Upgrade]

Added support for randomize firmware upgrade and provisioning. [Upgrade]

Added support for Voice Frame per TX in the audio settings. [Voice Frame Per TX]

Added option to keep keypad blue light ON/OFF based on schedule. [Door System Settings]

Added support for DHCP Option 120. [Enable DHCP Option 120 Override SIP Server]

Added support for reregister before expiration option. [Re-register before Expiration (s)]

Added support for anonymous RTSP Live View. [Enable Anonymous LiveView]

Added support for DHCP Option 42. [Allow DHCP Option 42 to override NTP server]

Firmware Version 1.0.5.6

Added support for 4 SIP accounts. [Account]

Added option to configure DTMF Payload value. [DTMF Payload Type]

Added option to disable outbound proxy route header. [Outbound Proxy Mode]

Added support for Packetization Mode 0. [SIP Packetization Compatibility Mode]

Added support for “Normal Open” or “Normal Close” setting when Alarm Out1 is set to Open Door. [ALMOUT1 Status]

Added support for System Health Alerts via Email. [System Health Alert]

Added option to upload custom doorbell ringtone. [Enable Custom Doorbell Ringtone]

Added option to set Schedule for “Local PIN to Open Door”. [Local PIN to Open Door Schedule]

Added support for CSV format when Importing/Exporting Card user data. [Card Management]

Added support for Anonymous Snapshot. [Enable Anonymous LiveView]

Enhanced security by only allowing numbers existing under “White List” to open the door remotely when call is initiated from GDS3710.
[Remote PIN to Open the Door]

Added Boot version information into System status. [Boot Version]

Firmware Version 1.0.5.2

Added Alarm_Out port (COM1 interface) to be used as Open Door 2. [Using Alarm Out (COM 1) to Control a Second Door]

Added option to Enable/Disable WebUI access. [Disable Web Access]

Added option to define number of snapshots to be uploaded when opening door. [Number of Snapshots when Door Opened]

• Added option to specify digital input to be normal Open or normal Close. [Input Digit 1 Status]

• Added ability to set schedule for Alarm In door opening. [Select Alarm Schedule]

• Added support for using Digit Only as Private PIN. [Local PIN Type]

• Added option to configure “No Key Entry Timeout”. [No Key Input Timeout]

• Added ability to email snapshot when door opened. [Snapshot when Door Opened]

Summary of Contents for GDS371 Series



























































































Reviews:

No comments