manualshive.com logo in svg

Grandstream Networks GDS371 Series, User Manual, Page: 62 / 90

Share
Download
Grandstream Networks GDS371 Series User Manual Download Page 62

LDC

Default “OFF”. When “ON” the display will take a normal shape, but will lose some details located at corner of the original

view.

LDC Ratio

Select LDC Ratio. Available options: 0.7 ; 0.8 ; 0.9 ; 1.0 ; 1.1 ; 1.2 ; 1.3

Default value is 1.0

Power

Frequency

Select the frequency power. 50Hz or 60Hz.

Shutter Speed

Defines how much time the shutter of the camera or exposed to the light, when taking a screenshot.

Table 20: CMOS Settings

Audio Settings

This page allows users to configure the audio settings.

Figure 89: Audio Settings Page

Preferred Audio Codec

Configures the audio codec. Three codecs are available:

PCMU, PCMA and G.722 are supported.

System Volume

Adjusts the speaker volume connected.

Doorbell Volume

Adjusts the doorbell volume.

Enable Custom Doorbell
Ringtone

User can check this option in order to use the custom Doorbell Ringtone.

Default Ringtone is used when this option is disabled.

Enable Audio Loopback Test

When enabled, indicating the device is ready for an audio loopback test. Please remember to disable this
mode once tested. 

Note:

 The OQA Speaker testing has been optimized starting from firmware version 1.0.11.23

Table 21 : Audio Settings

Click on

to upload the ringtone file, then press

Click on

to delete the existent custom ringtone.

Support upload WAV, PCM audio file(size <= 600K). Format limit to:

WAV:

1. Sample Rate: 8k or 16k.

2. Channel: Mono-channel or Dual-channel.

PCM:

1. Sample Rate: 8K.

2. Channel: Dual-channel.

Note:

 Empty audio file is not accepted.

Summary of Contents for GDS371 Series



























































































Reviews:

No comments